TurboShield
Hydro-Slick Rinse Aid
TurboShield rinse aid accelerates drying by promoting water run-off, minimising spots and streaks. It enhances efficiency without compromising results, leaving a clean, glossy finish that impresses every time. Perfect on paintwork, glass and wheels.
|
|
|
|
|
|
Where to use
Designed to be used after the contact wash stage, whilst the vehicle is still wet.
TurboShield is more than just a drying aid, it's a hydrophobic enhancer designed to reduce water spotting and minimise the risk of scratches during the drying stage of your car care routine.
Unlike the wash stage, where your vehicle benefits from the lubrication of water and shampoo, the drying process often leaves paintwork vulnerable. Studies show that many fine swirls and scratches actually occur while drying. TurboShield forms a slick barrier over wet paint, helping your drying towel, air dryer or filtered water glide effortlessly over the surface.
How to use
- Once the vehicle has been thoroughly washed after rinsing, use 2 to 3 sprays directly onto the wet panels.
- Rinse with high pressure water after 30 seconds of contact time.
- TurboShield will form a protective barrier, pushing water off the surface, speeding up the drying process and reducing the chances of marring whilst helping water sheet off more easily during each subsequent wash
- TurboShield pairs perfectly with microfibre drying towels. For best results, work panel by panel and ensure the product doesn’t dry on the surface.
Technical data
|
Milky White |
|
0.980 - 1.010 |
|
2.05-5 |
|
> 93°C |
Pack sizes
| Pack size | Order code | Pack size | Order code | |||
|
TC-SLD-6x500 |  |
|
TC-SLD-12x500 | |
|
|
TC-SLD-6X1 |  |
|
TC-SLD-12X1 | |
|
|
TC-SLD-2X5 |  |
|
TC-SLD-4X5 | |
What is TurboShield and how does it work?
TurboShield is a ready-to-use hydro-slick rinse aid designed to speed up drying, reduce water spotting, and enhance gloss. It works by creating a slick, hydrophobic barrier on wet surfaces that promotes water run-off and beading. Used after the contact wash stage, TurboShield protects the paint during one of the most scratch-prone steps of vehicle cleaning: drying.
When and how should I apply TurboShield?
Apply 2–3 sprays per wet panel immediately after rinsing off your shampoo. Allow 30 seconds of dwell time, then rinse again with high-pressure water. TurboShield immediately begins pushing water off the surface, making it easier to dry using microfibre towels, air dryers or filtered water. For best results, work panel by panel and do not allow the product to dry on the surface.
What are the main benefits of using TurboShield?
- Time-saving: Water sheets off quickly, reducing drying time.
- Scratch reduction: Creates a slick surface that reduces friction and towel drag.
- Gloss enhancement: Leaves a clean, polished, streak-free finish.
- Multi-surface use: Safe on paint, wheels and glass.
- Hydrophobic protection: Improves water behaviour during future washes.
Which vehicles can I use TurboShield on?
TurboShield is safe and effective for use on cars, vans, trucks, buses, and agricultural or industrial vehicles. It performs well in both detailing centres and fleet wash bays, particularly where drying speed and scratch prevention are essential. It’s ideal for waxed, ceramic-coated, or bare paint finishes, and works especially well in water-restricted environments due to its efficiency.
What pack sizes are available?
TurboShield comes in trigger spray bottles and bulk refill formats to suit operations of all sizes:
Trigger sprays:
- 500ml (packs of 6 or 12)
- 1L (packs of 6 or 12)
Refills:
- 2 x 5L containers
- 4 x 5L containers
This flexible range makes it easy to stock for mobile detailers, dealership valeters, or fixed wash bays alike.