TurboFoam
Pre-Wash Snowfoam Detergent
TurboFoam is a powerful yet safe pre wash snowfoam that creates a thick blanket, removing the bulk of dirt, grime and bird droppings without risk of scratching paintwork.
It breaks down road film quickly, leaving surfaces ready for contact washing. Suitable for use with hot or cold water, it works in just minutes.
|
|
|
|
|
|
|
|
|
Where to use
Designed as a high quality, general purpose pre-wash snowfoam detergent suitable for use on vehicles including:
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
TurboFoam will extend the lifespan of your vehicles: dirt, grime, road salt, and bird droppings can lead to corrosion and paint damage. Regular cleaning prevents long-term wear and extends the lifespan of your vehicles, reducing maintenance costs.
How to use
Snowfoam Lance:
-
Add 50ml of TurboFoam and 950ml of water into a typical 1-litre snowfoam lance
-
Adjust the flow rate of the pressure washer and lance based on the level of soiling and water pressure
-
Coat evenly from bottom to top using a pressure washer lance
-
Leave to dwell for at least 5 minutes before rinsing with high pressure water. Do not allow the foam to
dry to paintwork, glass or alloy wheels
Pressure Washer Chemical Injection Systems:
- Recommended for cleaning heavily soiled commercial vehicles, HGVs, buses and trailers, apply by pressure washer at a 10% dilution (1:9)
- You may adjust the chemical flow rate of the pressure washer based on the level of soiling and water pressure
- Allow a contact time of 5−6 minutes before rinsing clean with high pressure water
- Do not use in direct sunshine or allow TurboFoam to dry to the vehicle surface
Pack sizes
| Pack size | Order code | Pack size | Order code | |||
|
TC-SNF-6X1 |  |
|
TC-SNF-12X1 | |
|
|
TC-SNF-4X5 | |
|
TC-SNF-25 |  |
Find out more about TurboFoam
Close X