JETSPRAY 758x200px

Lemsolv Industrial

Heavy Duty, Water Rinsable Solvent Degreaser

A highly efficient heavy duty solvent degreaser, newly reformulated Lemsolv Industrial removes the most tenacious grease, heavy oil, wax, asphaltines and bitumen emulsions.

A blend of biodegradable surfactants and performance enhancing solvents, Lemsolv Industrial has a very high solvency factor (>100Kb), enabling it to penetrate and lift even the heaviest of oil contamination quickly and safely. An effective alternative to more hazardous and flammable solvent degreasers!

  •  Free from D-limonene and other hazardous solvents     
  • High solvency
  • High flash point
  • Biodegradable
  • Chlorine free
  • Water rinsable
  • Separator friendly


Our new Lemsolv Industrial has all the power of our old formulation but with improved safety and environmental benefits!

Effective & powerful

  • Removes the heaviest of oil contamination including stains caused by heavy oil, grease, asphaltines, oil from machines and wax
  • Heavy duty product with excellent material compatibility
  • Now even better: our new formulation has three times the solvency of our previous formulation!

Environmentally friendly

  • Biodegradable - naturally breaks down in the environment
  • Non-toxic and with no potential for bioaccumulation
  • Reduced VOC content

Safer to use

  • Not classified as flammable - elevated Flash Point of 65°C
  • Not classified as hazardous to health

Quick and easy to use

  • Fast-acting grease and heavy oil remover
  • Ready to use formula with no mixing or preparation needed
  • Water rinsable and separator friendly

Where to Use

Removes heavy oil, wax, grease, asphaltines and bitumen emulsions up to 10 times faster than traditional solvents from cleaning oil storage tanks and equipment.  

Lemsolv Industrial is extensively used throughout the engineering and transport industry as a cleaner and degreasing fluid for:

  • Heavy plants
  • Workshop floors
  • Engines
  • Chains
  • Machinery
  • and many others...

How to Use

  • Use as a contact, dip, immersion or spray on degreaser.
  • Apply undiluted to the oil contaminated area and allow a contact time of 10−15 minutes before rinsing with water.
  • Allow up to 60 minutes when used in the cleaning of oil tanks or heater tubes.
  • For best results use hot water to rinse clean.

Technical Data

  • Appearance
Clear colourless liquid
  • Specific Gravity
  • pH
  • Viscosity
  • Flash Point
65°C (not classed as flammable for transport)
  • VOC Content

Pack Sizes

  • 4 x 5 Litre containers
  • 25 Litres containers
  •  200 Litre drums
  •  1000 Litre IBC
  • 12 x 0.5L trigger sprays      
  • Tub of 250 wipes


Back to top